Survey & COGO
Unleash the power of AutoCAD® or IntelliCAD® with this Affordable
Survey & COGO software!
Survey and COGO runs inside AutoCAD®, BricsCAD® or IntelliCAD® based CAD systems, giving you time saving Field to Finish surveying and coordinate geometry (COGO) commands right inside your favorite CAD package!
Survey and Cogo is also included in Land Development Suite and Survey and Cogo Suite.
Import points into your drawing. You may import points from a text file in a variety of formats such as: Point number Northing Easting Elevation Description (P,N,E,Z,D or P,E,N,Z,D), X,Y,Z or from a LandXML file.
Set points by entering coordinates. Set points by picking a point. (if you pick a point on a 3D object, the elevation may be used for the point). You may also set points by entering a station and offset.
Automatic Linework and point symbols!
Whenever you add points to the drawing a user definable block can also be placed there automatically, such as an iron pipe or a power pole etc. Linework may also be imported from field codes.
Complete point protection gives you the choice of overwriting existing points or renumbering points as they are imported.
Boundary Traverse and Sideshot
Set points using a boundary traverse or sideshot with turned angle, North azimuth or South azimuth (use vertical angle or difference in elevation).
Select the points you need for a radial stakeout. Create a radial stakeout report using Turned Angle or North or South Azimuth.
Inverse points by entering the point number.
Find intersections by Bearing - Bearing, Bearing - Distance, Az - Az, Az - Distance, Distance - Distance, Line - Arc, and Point offset to a line.
Draw by point number
You may draw a line from point to point by entering a range of point numbers.
Import / Export
Import points from an ascii file or export points to an ascii file. A file is created with Point Number, Northing, Easting, Elevation and Description. You may also create a Point List for viewing in the same format. Import points from a LandXML file or export points to a LandXML file to share with other applications.
You may manipulate points in the drawing by moving or rotating them, you may change the elevation of a group of points, you may resize existing points in the drawing and you may also pivot the points about their placement point.
You may draw by entering bearings or azimuths and distances and curves.
Good for inputing an existing boundary.
Draw by deflection
You may draw by entering a deflection angle from a line.
You may draw a curve tangent to two lines or tangent to the end of a line.
You may draw curves by PC-RP-PT, PC-POC-PT and PC-PI-PT
You may label the bearing (or North or South Azimuth) and distance of a line by selecting it or by picking points. You may label a curve (radius, length) or (delta, radius, tangent, length and chord bearing & length) by selecting it or by picking points.
Label coordinates by picking a point.
Label areas by selecting a closed polyline.
Label station and offset from an alignment (line, polyline or arc).
You may list the bearing and distance of a line by selecting it.
You may list a curve (delta, radius, tangent, length and chord bearing & length) by selecting it.
Design Lots by Area
You may let the program automatically design lots by area using Slide Bearing, Hinge or Radial methods.
Let the program write your parcel descriptions! Select a commencing polyline, then select a parcel boundary.
The legal description is written to a text file that you may edit in your favorite word program.
Print a detailed traverse and closure report using Bearings or Azimuths describing each leg of the traverse along with the area and error of closure.
You may manipulate layers by picking entities on desired layers. The options are:
Isolate Layer - Sets first selected layer current and turns off all unselected layers.
Undo Isolate Layer - Restores layer settings.
Layer Off - Turns off selected layers.
Undo Layer Off - Restores layer settings.
Turn all layers on - Turns all layers on.
Layer Match - Moves selected entities to new layer.
Change to current layer - Moves selected entities to current layer.
Make Layer Current - Sets selected layer current.
Layer Walk - Displays layers one at a time.
Layer Lock - Locks selected layers.
Undo Layer Lock - Restores layer settings.
Layer Unlock - Unlocks selected layers.
Layer Freeze - Freezes selected layers.
Undo Layer Freeze - Restores layer settings.
Thaw all layers - Thaws all layers.
To help you in creating your drawing, we offer a collection of drafting aids. You may insert a graphic scale or place crowsfeet on a line. You may Label stations on an alignment, create a profile coordinate system, label profile elevations by picking and extract a profile from 3d faces or from 3D lines.
English and Metric
Use the English menu to use Quadrant bearings or Azimuths with feet.
Use the Metric menu to use Azimuths with meters.
See our user's manual for more info
Purchase this add-on for AutoCAD®
Purchase this add-on for BricsCAD®
Purchase this add-on for IntelliCAD®
(Such as CADian®, CMS®, ProgeCAD®, AcceliCAD® and many others)