Surveying and Land Development Software for
Surveyors, Engineers, Architects and Construction
- Testimonials
- Tutorials
- Tips & Tricks
- Users Manual
- Step by Step Points
- Free Lisp Routines
- Sales Policy
- Contact us
- FAQ
- On-Line Store

Traverse and Label plus Closure Reporting

Traverse and Label Plus allows you to draw a traverse using Bearing or Azimuth and Distances. You may also enter curves to the left or right (Radius and Arc length). You may also label any lines in the drawing by bearing or azimuth and distance and curves by radius and arc length. After a traverse or boundary is drawn you may select the traverse or boundary and print out a traverse and closure report describing each leg of the traverse along with the area and error of closure.

Drawing Setup

Select English or Metric units -changes the ltscale and labeling precision, changes dimscale to the scale of the drawing, it changes textsize to one tenth the drawing scale (English) and to 3mm (Metric) and it changes other dimension variables NOTE: You may edit dpset.lsp in the Dplabel directory if you want to change these settings. You may use notepad to edit this file.

Draw Traverse

Draw by entering bearings or azimuths and distances and curves. Good for inputing an existing boundary.

Labels

You may label the bearing and distance of a line by selecting it or by picking points. You may label a curve (radius, length) or (delta, radius, tangent, length and chord bearing & length) by selecting it or by picking points.
NOTE: LABELING WILL USE THE UNITS (ENGLISH OR METRIC) THAT IS SELECTED IN DRAWING SETUP. LABELING WILL ALSO USE THE CURRENT PRECISION SETTINGS

Label lines BRG

Label by selecting a line
Brg dist / - Label bearing and distance on top of line.
/ Brg Dist - Label bearing and distance on bottom of line.
Brg / Dist - Label bearing on top and distance on bottom of line.
Dist / Brg - Label distance on top and bearing on bottom of line.
Dist / - Label distance on top of line.
/ Dist - Label distance on bottom of line.
Note - Label bearing and distance with a leader to a line.

point to point

Label by selecting 2 points for a line
Brg dist / - Label bearing and distance on top of line by selecting points.
/ Brg Dist - Label bearing and distance on bottom of line by selecting points.
Brg / Dist - Label bearing on top and distance on bottom of line by selecting points.
Dist / Brg - Label distance on top and bearing on bottom of line by selecting points.
Dist / - Label distance on top of line by selecting points.
/ Dist - Label distance on bottom of line by selecting points.

Label lines AZN

Label by selecting a line
Azn dist / - Label North azimuth and distance on top of line.
/ Azn Dist - Label North azimuth and distance on bottom of line.
Azn / Dist - Label North azimuth on top and distance on bottom of line.
Dist / Azn - Label distance on top and North azimuth on bottom of line.
Dist / - Label distance on top of line.
/ Dist - Label distance on bottom of line.
Note - Label North azimuth and distance with a leader to a line.

point to point

Label by selecting 2 points for a line
Azn dist / - Label North azimuth and distance on top of line by selecting points.
/ Azn Dist - Label North azimuth and distance on bottom of line by selecting points.
Azn / Dist - Label North azimuth on top and distance on bottom of line by selecting points.
Dist / Azn - Label distance on top and North azimuth on bottom of line by selecting points.
Dist / - Label distance on top of line by selecting points.
/ Dist - Label distance on bottom of line by selecting points.

Label lines AZS

Label by selecting a line
Azs dist / - Label South azimuth and distance on top of line.
/ Azs Dist - Label South azimuth and distance on bottom of line.
Azs / Dist - Label South azimuth on top and distance on bottom of line.
Dist / Azs - Label distance on top and South azimuth on bottom of line.
Dist / - Label distance on top of line.
/ Dist - Label distance on bottom of line.
Note - Label South azimuth and distance with a leader to a line.

point to point

Label by selecting 2 points for a line
Azs dist / - Label South azimuth and distance on top of line by selecting points.
/ Azs Dist - Label South azimuth and distance on bottom of line by selecting points.
Azs / Dist - Label South azimuth on top and distance on bottom of line by selecting points.
Dist / Azs - Label distance on top and South azimuth on bottom of line by selecting points.
Dist / - Label distance on top of line by selecting points.
/ Dist - Label distance on bottom of line by selecting points.

Label curves

Label by selecting a curve
Rad ( Len - Label radius on outside and arc length on inside of curve.
Len ( Rad - Label arc length on outside and radius on inside of curve.
Len ( - Label arc length on outside of curve.
( Len - Label arc length on inside of curve.
Note Brg - Label Delta, Tangent, Arc length, Radius, Chord bearing and Chord distance in a note off the curve.
Note Azn - Label Delta, Tangent, Arc length, Radius, Chord Azimuth North and Chord distance in a note off the curve.
Note Azs - Label Delta, Tangent, Arc length, Radius, Chord Azimuth South and Chord distance in a note off the curve.

Label curves (point)

Label by selecting 3 points to define a curve (center start end - counterclockwise)
Rad ( Len - Label radius on outside and arc length on inside of curve.
Len ( Rad - Label arc length on outside and radius on inside of curve.
Len ( - Label arc length on outside of curve.
( Len - Label arc length on inside of curve

Label areas

Label areas in square feet and acres (or Hectares) by selecting a closed polyline

Closure Reports

Print a detailed traverse and closure report using Bearings or Azimuths describing each leg of the traverse along with the area and error of closure.

Traverse and Label is also included in Survey and Cogo. You may try Traverse & Label by downloading the free Demo of Survey and Cogo.


Purchase this add-on for AutoCAD®     Purchase this add-on for IntelliCAD®






Copyright © 2010

Free Unlimited Support

We provide free unlimited support via email.

Free 30 Day Demo

Download the program and use it FREE for 30 Days!

AutoCAD® is a registered trademark of Autodesk, Inc.

IntelliCAD® is a registered trademark of the IntelliCAD Technology Consortium.